How to Handle Damaged Electronics After a Fire

4/30/2022 (Permalink)

Cleaning up after a fire is a critical step in the restoration process. Many of your belongings can be saved if you treat them properly after a fire.

How To Deal With Damaged Electronics Following A Fire

A fire in your house in Verona, NJ, can have a large impact on your property. Not only is the building affected, but the belongings inside are often damaged as well. Even if the flames do not touch these items, smoke can cause problems, particularly for electronics. The following are some steps you can take to salvage these important devices during fire cleanup.

1. Unplug or Turn Off Your Devices

If any of your electronics are still on, turn them off if it is safe to do so. If smoke has gone inside of these objects, it can carry soot and contaminants throughout the devices. Heat and air circulation can make it easier for corrosion and permanent damage to occur if they are still on.

2. Clean the Exterior

While smoke damage can be more devastating to the inside of your devices, you should still take care to remove any residue from the outside. A wet rag is often enough for the exterior of objects with hard surfaces.

3. Drain Wet Electronics

If the fire was severe, then a hose was likely used to put out the flames. In this case, a cleanup and restoration service will need to remove water from the building before fire cleanup begins. Affected devices should be drained and dried as quickly and thoroughly as possible.

4. Have Them Inspected and Repaired

Whether they have been affected by water or smoke, your devices can be irreparably damaged if you attempt to use them before these elements have been completely removed. It is best to bring them to a professional for an inspection and any necessary repairs to make sure they are safe to use.

Fire cleanup is an important step in the restoration process. Many of your belongings can be salvaged after a fire, if they are treated in the right way. With the help of professionals, you can have your electronics ready for use again in no time.