How To Ensure a Fire Sprinkler System Is in Good Shape
A fire sprinkler system is a vital piece of fire prevention for your company. The goal of a sprinkler system is to save lives from fire and to reduce property loss. As with most modern technology, sprinklers are finely calibrated and engineered mechanisms. They activate when sensors detect heat or smoke. Water-based systems then spray water onto the incipient fire and, if all goes well, douse the flames. For the system to work properly, all of its many components need to be in good shape and operational. The NFPA 25 document provides the standards for the maintenance and inspection of fire sprinkler systems, fire pumps, and standpipe systems.
Quality Fire Suppression
Few devices offer better fire protection than a sprinkler system installed in your company in Glen Ridge, NJ. They must be designed, installed, and maintained to a high standard. An inspection should be conducted at regular intervals by knowledgeable personnel and should include the following components:
- Pipes and fittings
- Sprinkler heads
Equipment should also be tested on a regular basis. If any irregularities are found, they should be fixed or the component should be replaced. Inspections and tests are also a good time to repair any errors from the installation process. A quality maintenance program ensures the integrity of the system and makes sure it will work as intended in an emergency.
Professional Fire Mitigation
Even a brief fire in your building can produce significant damage. A local fire remediation company can arrive on your property in less than four hours and begin the restoration process. If the sprinkler system went off, the technicians will begin a fire sprinkler cleanup. This involves removing the water from the building and drying out the property and the contents. If the fire sprinkler system worked as intended, the building is likely to have suffered very little fire damage. However, smoke and soot damage may still need to be cleaned up.